T2 Recon Nailing System
The T2 Recon/Antegrade Femoral Nailing System is the latest development for the treatment of proximal hip and diaphyseal femoral fractures with the following features:
Features & Benefits
- 4° lateral bend and R2.0 antecurvature allow for trochanteric insertion in either Recon or Antegrade Femoral mode.
- Cannulated implants allow reamed or unreamed insertion over a 3 x 1000 mm guide wire.
- No guide wire exchange required after reaming.
- Cannulated 6.5 mm lag screws can be inserted over K-wires after desired positioning is achieved.
- Ø9 and 11 mm implants have a proximal diameter of 13 mm.
- Ø13 and 15 mm implants have a proximal diameter of 15 mm.
- Distal oblong hole allows dynamization.
- Dedicated set screw provides fixed angle by tightening down on proximal locking screw in Antegrade Femoral mode.
- Multiple End Caps provide optimal intraoperative length adjustment and prevent bony ingrowth into the driving end for easy nail removal.
Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following trademark(s) or service mark(s): T2. All other trademarks are trademarks of their respective owners or holders.
Product Quick Links
The literature below has been developed to provide healthcare professionals with general product information.
Please note: not all products are available in all countries.
For product availability or any further information, please contact your local Stryker representative.
| T2 Recon Nailing System Operative Technique | 4.9 mb | ||
| T2 Brochure | 4.6 mb | ||
| T2 Recon Nailing System Flyer | 154 kb | ||
| T2 Product Portfolio Flyer | 610 kb | ||
| T2 Wallchart | 1.5 mb |
